6
STEP3
STEP4
STEP5
--
Fix the handle bar (62) onto the handle bar
support post (70) by S6 Allen wrench tightly with
screws (77) and flat washers (17).
---Then insert the small cover (73) into the
handle bar cover-top as shown.
--Screw out the screws (77) and flat washers
(17) from the handle bar support post (70) by
S6 Allen wrench and keep them well.
-- Loosen the locknut on the phone holder
(45) by turning clockwise (be careful not to
wring it out); then insert the phone holder (45)
onto the phone holder fixing base of the
handle bar (62), orient it according to your
needs, and tighten it by turning anticlockwise.
