Loosen the 2 Allen screws.
And remove the bracket, as well as the white plastic spacer
(shown in the last picture).
Slide the lipstick LNB into place.
Use the supplied 4 screws to secure the LNB into place.
You can only use 3 of the four screws to secure the LNB
into place. The 4
th
hole is blocked by the bracket. This is
not an issue however as the lipstick LNB is quite secure.
Now place the GPS sensor back into place. Push down on
the sensor so that you hear it “SNAP” into place. Pull on
it slightly to make sure it is secure.
