Points of Interest
35
Copying a Preloaded POI
POI’s that have been preloaded as part of the background map can be saved as a user-
entered POI. This does not delete a preloaded POI (preloaded POI’s can not be deleted) it
just copies it to the
My Points of Interest
portion of the database.
1.
Press MENU.
2.
Use the Arrow joystick to highlight
Pts of Interest
.
3.
Press ENTER.
4.
Use the Arrow joystick up/down to highlight
Background Map
.
5.
Use the Arrow joystick left/right to select
Nearest
or
Alphabetical
.
6.
Press ENTER.
7.
[Only if Alphabetical selected] Use the Arrow joystick and the ENTER button to
enter the first few characters of the POI you are searching for. Highlight
OK
and
press ENTER to continue.
8.
Use the Arrow joystick to highlight the POI to be copied.
9.
Press ENTER.
10. Use the Arrow joystick to highlight
Save
.
11. Press ENTER.
Steps 12 through 14 are optional.
12. Use the Arrow joystick to highlight the field you want to change.
13. Press ENTER.
14a. If the icon field was selected: Use the Arrow joystick to select the icon desired and
press ENTER. To aid in your selection, the type of icon selected is displayed in the
information block at the top of the keypad.
14b. If the Name field was selected. Use the Arrow joystick to select the character
desired and press ENTER. If you make a mistake, highlight
Back
and press
ENTER. To access the lower case characters, highlight
Shift
and press ENTER.
To clear everything and start over, highlight CLEAR and press ENTER. When you
are satisfied with the name, highlight
OK
and press ENTER.
Note: User-entered POI names can only be eight characters long (including
spaces).
14c. If the Message field was selected. Use the keypad displayed just as was described
in 13b to enter a message for this POI.
15. When the Icon, Name and Message fields are done, use the Arrow joystick to
highlight
Save
.
16. Press ENTER.
