5
Fundamentals
Powering on the Magellan RoadMate Receiver
The Power On/Off switch is located on the top of the Magellan RoadMate receiver.
Turning the Magellan RoadMate receiver On
1. Press the Power button.
2. After the initial splash screen the Warnings screen is displayed. Read and tap
.
Turning the Magellan RoadMate receiver Off
1. Press the Power button.
Vehicle Profile
The first time you power on the device you will be given the
opportunity to enter the Vehicle Profile. Note that you can change
this at any time by accessing the vehicle profile icon from the Main
Menu.
The Vehicle Profile Menu provides access to the six different
vehicle details that are used by the Magellan RoadMate. If you are
going to enter your vehicle information please note that you must
enter the height, width and length as a minimum.
If you are not going to use the Vehicle Profile, uncheck the Set
Vehicle Profile box to continue.
Pairing Bluetooth
®
The instructions shown here are for pairing a phone during normal use.
1. The first time you use Bluetooth in your Magellan RoadMate receiver, the receiver will automatically ask
you if you want to pair a phone.
2. After selecting Yes the receiver is in pairing mode. Follow the instructions in your phone manual to set it in
pairing mode.
3. After the phone has searched for new devices, select “Magellan Roadmate” from the list.
4. Your phone will ask for a passcode.
5. Enter ‘1234’.Tap Yes on the Magellan RoadMate.
6. A screen will confirm the successful pairing.
