English
7
USB Port
A nine-contact female connector (Fischer type). Depending
on how it is configured, the USB port can be used in two
different ways:
1. For a USB host such as a mass storage device. In this
case, you should use a special adaptor cable to attach the
USB key to the ProMark 500. This configuration can be
used to log raw data on the USB key or upgrade the
ProMark 500 firmware from the files stored on the key.
2. For a USB device allowing ProMark 500 to be seen as a
disk from the computer connected to this port. In this
configuration, files can be transferred between the
ProMark500’s internal memory and the computer.
RS232/422 Serial Port
A seven-contact female connector (Fischer type) allowing you
to connect the ProMark 500 to an external device via an
RS232 or RS422 serial line (default: RS232). Changing the
configuration of the port can be done from the field terminal
using a $PASHS serial command, as explained in the
ProMark 500 Reference Manual
.
Bluetooth Device
An integrated Bluetooth module allowing the ProMark 500 to
communicate with a Bluetooth-enabled field terminal
through a wireless connection.
