MG6250 Console • User Guide
60 | Chapter 6 - Fire and Panic Alarms
Figure 9: : Delayed Fire Zone
Delayed Fire Zones
If the zone is a Delayed Fire Zone, there is an
automatic delay before your system contacts
your monitoring station. Refer to Figure 9 on
page 60 to prevent unnecessary reporting of
false alarms.
To clear a fire alarm triggered by accident:
1.
Press any key within 30 seconds of the alarm.
2.
Clear the problem from area (e.g., the smoke
around the smoke detector. If the problem
remains after 90 seconds, the alarm will
sound again. Alert will be delayed by another
30 seconds.
WARNING:
If you are unable to cancel the false
alarm, your system will send an alert. Call your
monitoring station to advise them of the false
alarm.