22
Activating a Leg in a Route
As you are navigating you may decide that you no longer wish
to continue on the leg that you are now using. Instead you
wish to use another leg of the route. You will need to activate
the leg of the route with the desired destination (TO land-
mark).
Press
MENU
until ROUTE appears at the top of the display.
Press
ENTER
. Use the LEFT/RIGHT ARROWs until the leg
you wish to activate is displayed. Press the UP ARROW. If
the leg is not active, the display indicates ENT TO ACTI-
VATE. Press
ENTER
. The leg has become activated, the
NAV screen is displayed, and the receiver begins to compute
the necessary information to continue you on the route using
the leg you selected.
If the display indicates ENT TO DEACTVATE, it means that
the receiver is using this leg to compute the navigational
information. Pressing ENTER at this screen not only
deactivates the leg and returns to the leg summary screen, but
deactivates the route as well.
Summary of Contents for Magellan GPS 310
Page 1: ...User Manual GPS 310 Satellite Navigator...
Page 6: ...iv GPS 310 TOC 10 18 99 9 27 AM 4...
Page 60: ...54...
Page 62: ...960 Overland Court San Dimas CA 91773 630786 B...