Creating a GOTO Route to a Map Object
This will create a GOTO route to a map object (city, highway, user POI, etc.) that you have
indicated by moving the crosshair cursor on the
Map
screen over the map object.
1.
While viewing the
Map
screen, use the
Arrow
joystick, causing the eXplorist to go
into Cursor mode.
2.
Continue using the
Arrow
joystick to move the crosshair cursor to the map object
that you want to go.
3.
Press
ENTER
.
4.
Use the
Arrow
joystick to highlight the map object that you want to use as the
GOTO. (Some areas of the map may have multiple map objects in the same
location.)
5.
Press
ENTER
.
6.
If a GOTO is active, you will be asked to deactivate it and create a new GOTO route.
Highlight
Yes
and press
ENTER
.
7.
The eXplorist will ask for a confirmation of the Goto. Use the
Arrow
joystick to
highlight
Yes
.
8.
Press
ENTER
.
After you press
ENTER
, the last viewed navigation screen will be displayed, updated as
needed to provide information about the GOTO route you have created. On the
Map
screen, a
line will be drawn representing the GOTO route. The
Compass
screen will change to display
the name of the POI used as the destination in the screen header bar and an icon
representing the destination outside the compass diameter.
Routes
47
