Magellan 2200VS, Product Reference Manual

Page: 90 / 432

5-80
Magellan
TM
2200VS/2200VS and 2300HS/2300HS
EAS Features
EAS Active State
Specifies the active state polarity of EAS (Electronic Article Survellance);
the inactive state is its opposite polarity. EAS output goes active during the
good read indication of a bar code, allowing the EAS device to deactivate a
tag on the product.
To set the EAS Active State:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAS ACTIVE STATE = ACTIVE LOW
EAS ACTIVE STATE = ACTIVE HIGH