Magellan 2200VS, Product Reference Manual

Page: 401 / 432

Product Reference Guide
D-391
Appendix D
Host Commands
Accepting Commands from an RS-232
Scanner Host
The scanner responds to the following RS-232 commands:
If one of the above commands is received, the scanner will perform the
steps indicated for the command. Host commands for other interfaces is
also available. Contact Tech Support for more details.
COMMAND ASCII HEX COMMENT
Enable Scanner E 0x45
Disable Scanner D 0x44
Reset Scanner R 0x52
Not On File Indication F 0x46 Long series of beeps
Beep Good Read Tone B 0x42 Beeps if Good Read Beep is enabled
Force Good Read Tone 0x01 Beeps regardless of beep setting
Bel 0x07 Force Good Read Tone
Identification request i 0x69
Returns long response
a
Health request h 0x68 Returns long responsea
Status request s 0x73 Returns long responsea
a. Call Tech Support for information.