NX Series User Manual rev 1.00
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
20
5.9.1. Mains connection
NX series powered systems are supplied with CN-0010 PowerCon-E/F CEE 7/7 mains cable (part number
00-00005561). Use only original or supplied by manufacturer mains cables!
NX series powered systems are equipped with PowerCon B mains power outlets for mains link to additional
NX series powered system.
NX series systems’ nominal mains power specifications: AC 220V, 50/60 Hz.
Nominal voltage tolerance: 100 - 250 V.
To power up the system, connect the mains cable to the system, then to the power outlet.
To completely power down the system, disconnect the mains cable from the power outlet.
5.9.2. Signal connections
NX series systems are equipped with XLR INPUT and XLR LINK connectors for signal connection.
Use of balanced XLR connector cables is recommended. In case when balanced XLR connections are not
available, unbalanced XLR connection is acceptable.
For linking the additional system to the same signal bus LINK connector may be used.
1
2
3
Shield (Ground)
Plus (+)
Minus (-)
Balanced XLR Plug connections
1
2
3
Shield (Ground)
Plus (+)
Shield (Ground)
Unbalanced XLR Plug connections
NX series powered signal connection diagram
5.9.3. Amplifier controls
Use several available NX series speaker system’s
amplifier controls to set up the entire system:
HPF 100Hz
: provides a 100Hz high-pass filter
to seamlessly couple the full-range system with
powered subwoofer.
MID CUT
: engages a mid frequency cut contour for
loudness effect, or cutting out harsh presense for
more comfortable background music experience.
HF BOOST
: engages a high-frequency contour to
compensate for loss for far-throw applications.
XLR-XLR cable
XLR-XLR cable
NX series
powered
full-range system
NX series
powered
full-range system
NX series
powered
full-range system
NX series
powered
full-range system
XLR-XLR cable
XLR-XLR cable
To signal source
