NX Series User Manual rev 1.00
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
18
Made in Ukraine
INPUT
www.mag-audio.com
NX 10, NX 12, NX 15
connection plate
NX 10i, NX 12i, NX 15i
connection plate
1. LABEL FIELD: name of the
system, along with its basic
parameters is noted here.
2. SERIAL NUMBER FIELD:
sticker with the systems
serial number is located here.
NEVER REMOVE THE SERIAL
FROM THE SYSTEM, AS IT
IS IMMEDIATE WARRANTY
VOID.
3. PARALLEL INPUTS: the
pair of parallel Neutrik®
Speakon connectors. Use this
connectors to connect power
amplifier and to feed the
signal to the parallel system
(optional).
4. INPUT: pair of screw
terminals. Use these to
connect power amplifier.
Made in Ukraine
NX series passive connection diagram
5.8.1. Passive connections
Suggested accessories:
CN-0031 (part No. 00-00004271)
CN-0032 (part No. 00-00004272)
Use power amplifier with DSP or power amplifiers
with external speaker processor with NX series
passive systems.
MAKE SURE TO USE HIGH PASS FILTER FOR ALL
NX SERIES SYSTEMS TO PREVENT EXCESSIVE
CONE MOVEMENT, RESULTING IN TRANSDUCER
DAMAGE OR FAST DETERIORATION.
Recommended HPF settings, suggested power
amplifier ratings, and connection pins are found in
table below:
System
Amplifier power
Amplifier impedance
Connection pins
Recommended HPF
NX 10
500 - 1000 W
8 Ohm
+1 -1
60 Hz or higher, 18 dB/oct min
NX 10i
500 - 1000 W
8 Ohm
+ -
60 Hz or higher, 18 dB/oct min
NX 12
500 - 1000 W
8 Ohm
+1 -1
55 Hz or higher, 18 dB/oct min
NX 12i
500 - 1000 W
8 Ohm
+ -
55 Hz or higher, 18 dB/oct min
NX 15
500 - 1000 W
8 Ohm
+1 -1
50 Hz or higher, 18 dB/oct min
NX 15i
500 - 1000 W
8 Ohm
+ -
50 Hz or higher, 18 dB/oct min
1
3
2
5.8. Passive speakers
1
2
4
DSP AMPLIFIER
Speakon-Speakon
cable
Speakon-Speakon
cable
Speakon-2 wire
cable
Speakon-2 wire
cable
NX series passive
full-range system
NX series passive
full-range system
NX i series passive
full-range system
NX i series passive
full-range system
