®
6
Instructions
UTILITY CARTS and ACCESSORIES
MB199UC / MB199UCFD
UTILITY CARTS and ACCESSORIES
- MANUAL - REV 1.0
- 2013
PN# 080106
Lower tray
The standard 3 drawer cart has a stationary lower tray that can be
converted to accept a slide out lower tray accessory by removing
the front and back tray wall components
(U.)
1.
Remove the 4 sheet metal screws
(T.)
along the bottom
(U.)
and pull the tray wall up and
out of the notches on either end of the side walls.
2.
Once these parts have been removed you will be able
to install the slide out lower tray accessory
(see
instructions on right for further details).
Slide out lower tray
The MB199UC utility cart platform will accept a slide out lower tray.
This tray utilizes the same slides as the standard drawers.
(See Slide and Drawer installation instructions when installing
this component)
1.
The slide out lower tray is for storage only and must
never be used as a step. The corners have 4 removable
handles/protective guards.
2.
To prevent damage or injury, make sure the lower
tray is in the closed position when moving the cart.
3.
The tray has stops that prevent it from extending
completely which allow the slide to hold 100 lbs.
4.
The lower tray handle/protective guards
(R.)
can be
removed or repositioned using the set screws
(S.)
.
T.
U.
R.
S.
U.