background image

JSA2200AJ 2 

5/1316

WARNING INFORMATION

This is the safety alert symbol. It is used to alert you to  
potential personal injury hazards. Obey all safety messages 
that follow this symbol to avoid possible injury or death.

   

WARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL BEFORE USING PRODUCT.  

   

SAVE THESE INSTRUCTIONS

It is the responsibility of the owner to make sure all personnel read this manual prior to using this jack. It is also the responsibility of the jack owner to keep this 
manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact Mac Tools for replacements. If 
the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator's native language by  
the purchaser/owner or his designee, making sure that the operator comprehends its contents.

This product must only be used for lifting, but not sustaining loads. Do not use this product for any other purpose. The use of portable automotive lifting  
devices are subject to certain hazards that cannot be prevented by mechanical means, but only by the exercise of intelligence, care, and common sense.  
It is therefore essential to have owners and personnel involved in the use and operation of the equipment who are careful, competent, trained, and qualified  
in the safe operation of the equipment and its proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly  
securing loads, overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

•  Read, study, understand and follow all instructions before operating this device
•  Wear eye protection that meets ANSI Z87.1 and OSHA standards (users and bystanders)  
•  Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or unstable due to loose or missing  
  components. Make corrections before using  
•  Do not use or modify this product for any other purpose than that for which it was designed without consulting the manufacturer’s authorized representative 
•  Use only on a hard level surface free from obstructions so the jack is free to reposition itself during lifting and lowering operations
•  Lift only on areas of the vehicle as specified by the vehicle manufacturer 
•  Do not use jack beyond its rated capacity. Do not shock load
• 

This is a lifting device only. Immediately after lifting, support the vehicle with jack stands capable of sustaining the load before working on the vehicle

 

•  Center load on saddle. Be sure setup is stable before working on vehicle 
•  Do not move or dolly the vehicle while on the jack 
•  Do not use any saddle adapters or saddle extenders, other than the ones supplied with the jack, between the stock lifting saddle and the load 
•  Always lower the jack slowly and carefully
•  No persons should be under vehicle when jack is in use
•  This product may contain one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 

Wash hands  

  thoroughly after handling

•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, MAINTENANCE INSTRUCTIONS 
and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could cause accidents resulting in serious or fatal personal 
injury and/or property damage.

WARNING:

 Indicates a hazardous situation  

which, if not avoided, could result in death  
or serious injury.

WARNING

WARNING

WARNING

WARNING

THIS INSTRUCTION MANUAL USES THE FOLLOWING SYMBOLS AND DEFINITIONS TO ALERT YOU TO HAZARDOUS CONDITIONS WHICH MAY CREATE A RISK 
OF PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Summary of Contents for JSA2200AJ



















Reviews: