VerA M User Manual rev 1.00
12
M
AG
AU
D
IO
SY
ST
E
M
O
PE
R
A
TI
O
N
Balanced XLR
VerA M frequency corrections (VerA M Sub + VerA M Top)
Unbalanced XLR
5.3.4 Powered speakers controls.
Amplifier controls allow tailoring VerA M performance for any particular venue or project.
Volume knob.
Adjusts the amplifier’s gain.
MID CUT button.
Controls the mid-range of full-range cabinets.
HF BOOST button.
Raises the high-frequency output for far-field applications.
BOOST button.
Turns on the Dynamic Bass Boost.
Fixed HPF.
All powered X series are equipped with HPF for driver protection that cannot be turned off.
Dynamic Bass Boost.
For improved performance at the bottom end of the frequency range at low volumes,
Dynamic Bass Boost adds up to +4dB gain on frequencies below 60Hz depending on the input level. This
contour can be switched on using the BASS BOOST button on VerA M Sub.
5.3.3 Balanced and unbalanced line inputs.
VerA M Sub subwoofers are equipped with XLR INPUT and XLR LINK connectors for signal connection.
The use of balanced XLR connector cables is recommended. In case when balanced XLR connections are not
available, an unbalanced XLR connection is acceptable.
1
2
3
Shield (Ground)
Plus (+)
Minus (-)
1
2
3
Shield (Ground)
Plus (+)
Shield (Ground)
