-17-
2.3 Technical data
Universal motor, radio and TV
interference suppressed
230 V~, 50
Hz
120 V~, 60
Hz
Power input (nominal load)
3000 W
2500 W
Current at nominal load
15,5 A
23,5 A
Speed of the output shaft when idle
4050 rpm
Speed of the output shaft with nominal
load
4050 rpm
Can be pivoted from
0 – 60°
Depth adjustment
0 - 83.5 mm (0- 3 29/100 in.)
Working tool
for bird's mouths:
Cutter head Ø 150 x 115 mm
(5 29/32 x 4 17/32 in.)
n
max.
= 5000 rpm
for flattening:
Cutter head Ø 236 x 50 mm (9
29/100 x 1 97/100 in.)
n
max.
= 5000 rpm
Cutter head Ø 190 x 80 mm (7
31/64 x 3 5/32 in.)
n
max.
= 5000 rpm
Weight
Machine with
stop without cutter head and
power cord
21,1 kg (46.5 lbs)
Cutter head Ø 150 x 115 mm
3.0 kg (6.6 lbs)
Cutter head Ø 236 x 50 mm
3.5 kg (7.7 lbs)
Cutter head Ø 190 x 80 mm
5.9 kg (13 lbs)
Cutting speed with nominal load:
Cutter head Ø 150 x 115 mm
31.8 m/s (104 ft/sec.)
Cutter head Ø 236 x 50 mm
50.0 m/s (164 ft/sec.)
Cutter head Ø 190 x 80 mm
40.3 m/s (112 ft/sec.)
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1:
Sound power level
Workplace-related emission value
Idling
108 dB (A)
97 dB (A)
Machining
109 dB (A)
98 dB (A)
The noise measurements were made with the standard cutter head included in delivery.
Workpiece: Spruce 140 x 140 x 2000 mm; Cutting depth: 20 mm; Guide without stop
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is 4.0 m/s
2
.
