![background image](http://html.mh-extra.com/html/mafell/z5ec/z5ec_operating-safety-instructions-manual_689067013.webp)
Z5Ec
02/2022
13
4.3
Chip extraction
Caution
Health hazards from wood dust
The dusts produced during work can be inhaled and can cause health damage.
➢
Harmful dust must be extracted with a HEPA 13 dust extractor.
➢
Wear a dust mask during work.
For all work that produces a significant amount of dust, connect the machine to a suitable external extraction
device. The air velocity must be at least 20 m/s [65 ft/sec].
The inner diameter of the hose connector is 35 mm [1.4 in].
4.4
Saw band selection
To achieve good cutting quality, use a sharp tool and select a tool from the following list that is appropriate for
material and application:
Cutting dry and hard wood; for tight curves:
-
Saw band 1752 x 6 x 0.65 mm [68.98 x 0.24 x 0.03 in]; 6 teeth per inch
Cutting wet and dry wood; for tight curves:
-
Saw band 1752 x 6 x 0.65 mm [68.98 x 0.24 x 0.03 in]; 4 teeth per inch
General purpose for wet and dry wood; curves and straight ripping and cross-cutting:
-
Saw band 1752 x 8 x 0.65 mm [68.98 x 0.32 x 0.03 in]; 4 teeth per inch