MT55cc
01/2022
15
4.4
Saw blade selection
To achieve good cutting quality, use a sharp tool and select a tool from the following list that is appropriate for
material and application:
Cutting softwood and hardwood across and along the grain direction:
-
Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 32 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially along the grain direction:
-
Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 16 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially across the grain direction:
-
Carbide circular saw blade Ø 162 x 1.8 x 20 mm, 48 teeth [Ø 6.38 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially across the grain direction "fine cuts":
-
Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 56 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting wood fiber insulation material:
-
Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 32 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting plastic material (styrofoam):
-
Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 16 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting fiber cement board:
-
Diamond saw blade Ø 160 x 3.0 x 20 mm, 4 teeth [Ø 6.30 x 0.12 x 0.79 in]
4.5
Changing the saw blade
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
➢
Wear protective gloves when you change the saw blade.
➢
Be careful when you change the saw blade.
