MKS185Ec
16
01/2022
4.5
Changing the saw blade
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
➢
Wear protective gloves when you change the saw blade.
➢
Be careful when you change the saw blade.
Use the following procedure to change the saw
blade:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Put the disconnected machine on a flat
surface.
4.
Press and hold the locking pin (10).
➢
The mechanism that locks the saw shaft
is activated.
Fig. 7: Locking the saw blade
5.
Using the Allen key (B), turn the flange screw
(12)
counterclockwise
to loosen it.
➢
You can now release the locking pin.
6.
Remove the flange screw (12) and the front
clamping flange (13).
Fig. 8: Removing flange screw and clamping flange
