![background image](http://html1.mh-extra.com/html/mafell/kss-400-36v/kss-400-36v_original-operating-instructions_3405817018.webp)
-18-
2.3 Technical data
Nominal voltage
36 V
Saw blade speed while idling
3500
rpm
Saw blade speed at normal load
3000
rpm
Cutting depth 0° / 45°°
55/45.5 mm (2 3/16 in./1 13/16 in.)
Tilting saw unit
0 - 45°
Saw blade diameter max/min
160/149 mm (6 1/4 in./5 3/4 in.)
Largest thickness basic saw blade body
1.2 mm (3/64 in.)
Tool cutting width
1.8 mm (0.070 in.)
Saw blade mounting hole
20 mm
Hose connector diameter
35 mm (1 3/8 in.)
Weight with rechargeable battery without guide assembly
4.8 kg (5.9 lbs)
Dimensions incl. guide assembly (W x L x H)
260 x 750 x 260 mm
As cross-cutting system
Cutting depth 0/45°°
49/40 mm
Cutting length at 12/49 mm workpiece thickness
470/400 mm (18 1/2 in./15 3/4 in.)
Weight with rechargeable battery and guide assembly
6,1 kg (13.5 lbs)
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Workplace-related emission value
Idling
102 dB (A)
91 dB (A)
Machining
99 dB (A)
88 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.6 Scope of supply
Cross-cutting system KSS 400 / 36 V complete with:
1 carbide-tipped circular saw blade Ø 160 mm (6 1/4 in.), 32 teeth
1 riving knife / splitter (thickness 1.2 mm/3/64 in.)
1 parallel stop
1 hose connector
1 service tool in bracket on the machine
1 carrying case
1 operating manual
1 folder “Safety Instructions”
1 charger APS 36
2 batteries 36 B 94
1 operating instructions APS 36