![background image](http://html.mh-extra.com/html/mafell/ksp-65-f/ksp-65-f_original-operating-instructions_689050016.webp)
-16-
!
Saw blade speed
"#
no load
4500 rpm
"#
normal load
2550 rpm
!
Cutting speed at normal load
25.4 m/s (83.32 ft/sec.)
!
Hose connector diameter
35 mm (1 3/8 in.)
!
Weight without mains cable
7.1 kg (15.6 lbs)
!
Dimensions (W x L x H)
270 x 400 x 274 mm (10 5/8 x 15 3/4 x 10 15/32 in.)
1.4
Noise emission
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
The noise measurement was recorded using the saw blade included in the standard equipment.
The stated values do not take any series variance into account and are not suitable for determining the immis-
sion sound power level, since this varies depending on the operating time, the machining operation concerned
and environmental factors. The immission sound power level can consequently be determined only in the indi-
vidual instance on the premises of the machine user.
1.5
Vibration
The typical hand-arm vibration is less than 2.5 m/s
2
.
1.6
Delivery specification
Portable circular saw KSP 65 F complete with:
1 TCT saw blade
!"
190 mm (7 31/64 in.), 24 teeth
1 riving knife / splitter (thickness 2.0 mm / 5/64 in.)
1 hose connector
1 parallel guide fence
1 mains cable
1 service tool in holding device on the machine
1 operating manual
1 folder „Safety instructions“
1.7
Safety devices
Great attention was paid to the safeguarding of opti-
mum working conditions right from the early devel-
opment stage of this new machine. A wide variety of
mechanical and electrical safety devices, ergonomic
principles and measures to reduce noise and dust
emissions were employed. In accordance with the
European Standards and with regard to the required
protection devices stipulated by the use according to
intended purpose, the machine is protected against
dangers which could not be eliminated by its design.
The protection devices are in particular:
!
Protection against contact with the tool:
In accordance with the requirements in
EN 60745-2-5, the tooth rim of the saw blade
not required for cutting is secured by a fixed saw
guard and the part required for cutting is
secured by a self-closing retractable saw guard.
To aid the opening of this retractable saw guard
once it has been positioned on the workpiece, a
handle is attached to the guard.
Universal motor, radio and TV interference suppressed
230 V~, 50 Hz
110 V~, 50 Hz
!
Power input (long running use)
1800 W
1550 W
!
Current (normal load)
8.2 A
14.5 A
Sound power level
Workplace-related
emission value
No load
106 dB (A)
95 dB (A)
Operation
108 dB (A)
97 dB (A)