![background image](http://html1.mh-extra.com/html/mafell/fm-800/fm-800_translation-of-the-original-operating-instructions_3427627014.webp)
-14-
2.3
Technical data
FM 800
FM 800
FM 1000
FM 1000
Universal motor, radio and TV interference
suppressed
230 V~,
50 Hz
120 V~,
60 Hz
230 V~,
50 Hz
120 V~,
60 Hz
Power input (nominal load)
800 W
1000 W
Current at nominal load
4,0 A
7,5 A
4,6 A
8,3 A
Idling speed
7.000 – 25.000 rpm
4.000 – 25.000 rpm
Tool holding fixture with collet ø
6 mm (0.24 in.)
Tool shank maximum
Tool shank minimum
8 mm
3 mm (0,12 in.)
Milling cutter Ø, maximum
36 mm
Abrasive wheel Ø, maximum
40 mm
Weight without mains cable
1.6 kg (3.53 lbs)
Dimensions (W x L x H)
73 x 254 x 79 mm (2.87 x 10 x 3.11 in.)
2.4
Emissions
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1
Noise emission specifications
Noise emission values determined according to EN 60745:
Sound pressure level
L
PA
= 75 dB (A)
Uncertainty
K
PA
= 3 dB (A)
Sound power level
L
PA
= 86 dB (A)
Uncertainty
K
PA
= 3 dB (A)
The noise measurement was done without tool at idling speed.
2.5
Scope of supply
Milling motor FM 800 / FM 1000 complete with:
1 collet Ø 6 mm
1 open-ended spanner AF 17
1 operating manual
1 folder "Safety instructions"
2.6
Use according to intended purpose
The milling motor is intended for permanent
installation in guiding machining systems with ø 43
mm clamping collar. Tools are selected depending on
the materials to be processed and the capacity of the
feed drives.
Please take into account the milling motor capacity at
maximum tool diameter and anticipated machining
depth.
We exclude the use as hand-guided power tool.
Summary of Contents for FM 800
