![background image](http://html1.mh-extra.com/html/mafell/a12/a12_translation-of-the-original-operating-instructions_3396615019.webp)
-19-
4
Layout
4.1
Depicted components
(see Fig. 1)
(1) Exchangeable attachment (chuck)
(2) Adjusting ring
–
torque preselection
(3) Gear change slide - first or second gear
(4) Sense of rotation selector switch, double sided
(5) Bit adapter
(6) Belt clip, can be used on both sides
(7) Button - capacity display
(8) Rechargeable battery
(9) Capacity and signal display
(10) LED light
(11) Switch trigger
4.2
Symbols
Movement direction
First gear
Second gear
Screwing
Drill bit
Nm
Torque
5
Operation
5.1
Rechargeable battery, capacity and signal
display
(see Fig. 1)
•
Charge the rechargeable battery prior to use.
•
Recharge the rechargeable battery in case of
loss of power.
•
Press the button (7) to query the charge
condition of the rechargeable battery. The
capacity can be read off the LED lights (9).
•
If a LED light (9) flashes, the rechargeable
battery is almost empty. Recharge the
rechargeable battery.
•
The optimum storage temperature is between
10 °C and 30 °C.
5.2
Removing and inserting the rechargeable
battery
(see Fig. 2)
Removing:
Press the unlocking mechanism (12) and
pull the rechargeable battery (8) out to the front.
Inserting:
Push on the rechargeable battery until it
clicks into place.
5.3
Sense of rotation, transport lock
(see Fig. 1)
R = Clockwise rotation
L = Anti-clockwise rotation
0 = Centre position: Transport lock
(Switch-on lock)
5.4
Selecting the gear speed
(see Fig. 1)
Actuate the switch slider (3) only
when the motor is standing still!
First gear: low speed, high torque;
preferably for screwing
Second gear: high speed; preferably
for drilling
5.5
Setting the torque
(see Fig. 1)
Set the torque by turning the adjusting ring (2).
1...10 = Torque limiting (setting range 0.5 - 5
Nm)
= Adjusting the drill setting (max. torque,
without torque control). Do not block the
spindle to avoid overloading the motor.
5.6
Switching on/off, setting the speed
(see Fig. 1)
Switching on:
Press the switch trigger (11) and keep
it depressed. The speed at the switch trigger can be
changed by the depth to which it is depressed.
Switching off:
Release the switch trigger (11).
Summary of Contents for A12
