54
TYRES
Tyre replacement
The specification of the tyres fitted to your
motorcycle has been established after
rigorous testing by Maeving, to provide
maximum comfort, tyre wear and stability.
It is vital the same size and specification of
tyre is fitted to the motorcycle when having
new tyres fitted. For further information, see
Specifications on page 69.
Warning
: Fitting non-approved tyres
to your motorcycle may lead to the
motorcycle becoming unstable. This
can lead to loss of control and an
accident.
Rear wheel removal
To remove the rear wheel:
1. Support the motorcycle on a suitable
paddock stand(s).
Note
: The motorcycle is shown not
supported on a paddock stand to
improve clarity.
2. Remove the 12-volt battery. For further
information, see 12-volt battery removal
and installation on pages 59 and 60.
3. Cut the 2 retaining straps securing the
rear light wiring harness to the rear
brake caliper hose.
Note
: Fit new retaining straps when
reattaching the rear light wiring
harness to the motorcycle.
4. Remove the 3 bolts securing the rear
mudguard to the swinging arm and
mudguard support.
Note
: When refitting, tighten to
8 Nm
.
!
!
!
!
!
!
!
!
!
!
!
3
4
Summary of Contents for RM1
Page 1: ......
Page 76: ...Maeving RM1 Owner s Handbook 76 SERVICE AND MAINTENANCE General repair notes...
Page 83: ......
Page 84: ......