maestrowave MW10T, Operation Manual

Page: 7 / 12

6
USING/SAVING A PROGRAM
To use a program, simply press the required number key and the oven will immediately start cooking based on the selected
settings. Your oven will come preset with cooking programs already assigned to each number key. The default oven settings
are shown below:
Number Pad 1 2 3 4 5 6 7 8 9 0
Preset 10 sec
100% 20 sec
100% 30 sec
100% 45 sec
100% 1 min
100% 1 min
30 sec
100% 2 min
100% 2 min
30 sec
100% 3 min
100% 3 min
30 sec
100%
For frequently used cooking stages and times, you can save your own settings to a number key and conveniently activate it
just by pressing the number button.
To override a default program with your own setting:
1. Touch PROG, you will hear a beep. Then immediately press POWER LEVEL, you will hear 2 beeps
2. Press the number key that you wish to save your program to
3. Enter up to 3 cooking stages – see instructions for Time and Power Level and Multiple Stage Cooking
4. Touch PROG, then POWER LEVEL again to save
5. Press STOP to return to normal operation
HOW TO USE THE X2 PAD
The x2 pad has 2 functions.

It can be used to simply double the time of any program. Simply press the x2 key, followed by the preset number that
you wish to use. This function can only be used if you have not set a second program, as below.

It can be used to store a further 10 presets. These can be single stage only.
1. Touch PROG, you will hear a beep. Then immediately press POWER LEVEL, you will hear 2 beeps
2. Press x2 pad
3. Press the number key that you wish to save your program to
4. Enter the power level and time required
5. Touch PROG, then POWER LEVEL again to save
6. Press STOP to return to normal operation
7. To operate the second program, press x2, followed by the preset number
AUTO START
As a default setting, the oven will automatically start cooking as soon as a number key is pressed.
To remove this feature, press and hold STOP/RESET for 5 seconds, with the oven door closed. The display will show P.
You can now select any number pad and will need to press START before cooking commences.
If you wish to turn Auto Start back on, simply hold STOP/RESET for 5 seconds again. The display will show P+L.