CLEANING
1.
Always turn off and unplug the slicer before cleaning.
Always set the slice thickness regulator to the zero position to avoid cutting yourself.
2.
Never use any chemical or abrasive products. Do not use a brush or any other type of utensils which could
damage the different parts and surface of the slicer.
3.
Use a damp cloth with detergent to clean the machine and then dry it.
The slicer should be cleaned daily.
4.
Remove the blade cover away from the blade when cleaning and clean the product carriage also.
5.
Warnings for blade cleaning:
a)
Wear metal mesh safety gloves when the slicer is in operation.
b)
Do not touch the edge of the blade.
c)
This is a dangerous operation and caution should be used.
6.
You should run the machine for 5 minutes after cleaning.
7.
Do not put the machine directly into any container with water in it.
This machine is not waterproof.
CARRIAGE AUTO LOCK
Move the carriage stand towards the left to the auto lock hole
position and loosen the carriage knob until a clicking sound is heard.
The carriage stand is now locked to prevent movement if the
slicer is relocated.
MAINTENANCE
1.
Minimizing blade rust:
a)
Wipe the blade with a dry cloth at the end of each shift or day.
b)
Spread a layer of cooking oil on the edge of the blade with a dry cloth.
c)
Sharpen the blade every day to prevent rust.
2. Guide lubrication:
a) Push the carriage to one side, and clean the grease and dirt from the guide with dry cloth.
b) Smear the guide surface with food safe lubricant. Spread well and lubricate.
c) It is best to lubricate the guide every week.
3. Pusher axle lubrication:
a) Clean the pusher axle with a dry cloth.
b) Put the lubricant on the both of the axles and pull the pusher up and down to distribute evenly.
c) It is best to lubricate the axle every day.
4. Sharpener lubrication:
a) Clean the sharpener axle before sharpening.
b) Put the lubricant on the both of the axle.
c) Turn and slide the axle until it moves well.
5. Localizing head lubrication:
a) Turn the fixing positioner counter-clockwise to the maximum setting.
b) Clean the localizing head and apply lubricant.
c) Turn the fixing positioner back to the original position.
d) It is best to lubricate this every week. Take care not to use too much oil.
Summary of Contents for MS220SG
Page 1: ...SLICER INSTRUCTION MANUAL MS220SG MS250SG MS300SG MS250SG MS300SG...
Page 6: ...EXPLODED VIEW...
Page 7: ......
