PARTS INCLUDED
The following parts are included with your Maestrowave Slicer. Please check all packaging to ensure that all
required parts are present before proceeding.
Blade Sharpener
Safety Guard
Blade Removal Tool
Lubricating Oil
Instruction Manual
MACHINE INSTRUCTIONS & PARTS
1. Sharpener
6. Slicer thickness regulator
2. Blade cover
7. Power button
3. Product pusher
8. Plate
4. Carriage
9. Slicer
5. Product pusher handle 10. Safety guard
ASSEMBLY
Remove slicer from packaging, fit plastic safety guard (10) to carriage and blade sharpener (1) before use.
OPERATION
1.
The machine should be installed on a work surface that has sufficient stability and strength to support the
weight of the machine and product being sliced.
2.
Make sure that the line voltage of your power source matches the rated voltage and frequency on the
machine.
3.
Turn the switch on and let the machine run for approximately 2-3 minutes before use. Ensure that the
machine is running properly before use.
4.
When the power is on, the light bulb on the power button will glow.
5.
Adjust the slice thickness by turning the slice thickness regulator counter-clockwise.
Turn the positioner knob clockwise. Make sure the positioner head touches the plate.
6.
Push the product carriage back and forth over the blade with a continuous motion, using the product pusher
handle and the pusher knob.
7.
After slicing the desired amount turn the positioner knob back to the original position.
8.
You can now pick up the sliced product.
1
2
5
3
4
6
7
10
8
9
Summary of Contents for MS220SG
Page 1: ...SLICER INSTRUCTION MANUAL MS220SG MS250SG MS300SG MS250SG MS300SG...
Page 6: ...EXPLODED VIEW...
Page 7: ......
