Maestro MR227, Owner'S Manual

Page: 7 / 32

7
- Make sure that all the parts of appliance don’t have
damages.
- Unwind the power cord completely.
ATTENTION! A small quantity of smoke or a specific smell may
appear after the first switching on as the result of conservation
materials contact with heating element. This is a normal
phenomenon and it shall disappear after several minutes of
operation.
Changing the styling attachments
Remove the styling attachment by pulling it off. Place a different
styling attachment and allow it to latch in place.
Notes:
The size of curls depends on the diameter of the styling attachment.
The styling attachment with a diameter of 16 mm creates small curls
and is especially suitable for short hair.
The styling attachment with a diameter of 19 mm can be used to
attain greater volume and medium sized curls with longer hair.
- Before switching on the hairdryer to the power supply, make sure
that the device switch (C / Pic.1) is set to “0” (oFF).
- Connect the device to the power supply.
- Choose the desired operating mode by the Switch (C /Pic.1):
EN
Position
of the switch
Function
0 (oFF) - the device is switched off
1 First rate uses half of the power of the device, used for
delicate hair drying and for modeling.
2 The second speed includes the entire capacity of the
device and is used for rapid hair drying.
*
CooL mode (Cold air)
Enabling CooL mode significantly reduces the
temperature of the air and contributes to the rapid cooling
of the hair