52 Maestro E200 Series
www.maestro-wireless.com
13.5.2.1
OpenVPN client
You can access the OpenVPN client under
Services / OpenVPN
.
OpenVPN Client will attach itself to the configured OpenVPN server over any
available WAN interface. If the auto-connect function is enables, OpenVPN
will not only connect over available WAN but also switch between WANs as
and when one WAN fails-over to another and also auto starts in every reboot.
This can be achie
ved by clicking on the „
enabled
‟ tick box.
You can either edit the sample client or create your own configuration from
ground up.
Click on the Edit sample_client and you will see the following menu
This is the basic configuration menu, which you need to configure
ITEM
DEFINITION
Verb
Here you can set the output verbosity level. Higher the
verbosity, higher will be the internal log details
Tun_ipv6
This will make the tunnel IPv6 capable
Nobind
Does not bin local address and port
Comp_lzo
Uses lzo compression
