V1.4
– Apr-13
User’s Manual
Page 25 of 34
7 Mounting
This chapter describes the suggested mounting process for the A2035-H receiver
modules. In a RoHS compliant product with a RoHS compliant process it is rec-
ommended to use chemical tin as the counter-
part to the module’s pins. This will
guarantee highest resistance against shocks.
7.1 Proposed Footprint for Soldering
The following proposal of a footprint for soldering is assuming a stencil thickness of
150µm.
marks the center of the through holes.
Figure 12: Soldering footprint proposal A2035-H
Please note that copper and solder paste footprint are identical. The final footprint
has to be evaluated and qualified by the manufacturer according to the specific
processes.
