- 19 -
4.3 OUTRIGGER OPERATION
Set the mode selector switch (5) for the transmitter to Outrigger (F) or (R).
• Outrigger (F) operates
outriggers (1) and (4).
•
Outrigger (R) operates
outriggers (2) and (3).
[ OUTRIGGER SETTING OPERATION ]
1. Change the mode to with the Transmitter speed
selector/Outrigger select switch (6) on the transmitter.
2. Operate the control levers to extend and set the outriggers.
Repeat the above steps for the other two outriggers by operating the mode selector switch(5).
• Left lever:
outrigger 1 or 2
• Right lever:
outrigger 4 or 3
3. When the grounding cylinder is extended and the adapter is grounded by manipulating the
control lever, release your hand from the operation lever.
Operate the above step for the other two outriggers with the mode selector switch (5) to allow
them to make contact with the ground.
• Left lever:
outrigger 1 or 2
• Right lever:
outrigger 4 or 3
4. When the machine is raised up from the ground with a height of about 50 mm, manipulate the
control lever while checking the position of the yellow bubble in the leveling instrument to
keep the machine in a horizontal position.
[ OUTRIGGER STOWING OPERATION ]
Reverse the outrigger set up procedure to stow the outrigger.