- 17 -
4. REMOTE CONTROL
[ POWERING ON ]
1.
Press the remote controller power ON/OFF switch (3)
once, and make sure that the power indicator on the
upper left corner of the left display blinks in green.
“Startsequenz eingeben” appears on the right display
when the remote controller is preparing to be powered
ON.
NOTES
When the controller is ready for power-on, performing one
of the following operations will turn OFF the power to the
controller:
• Press and hold the remote controller power ON/OFF
switch (3).
• A switch other than the remote controller power ON/OFF
switch (3) is pressed.
• The controller has been left un-operated for 5 second or
longer.
2.
When the controller is ready for power-on, pressing and
holding the remote controller power ON/OFF switch (3)
will change the display indication, allowing you to operate
the remote controller.
[ POWERING OFF ]
Press the Emergency stop/Remote controller power OFF
switch (10) when turning off the power to the transmitter, or
in case of an abnormality in crane operations.
The power of the Transmitter turns OFF and the engine
stops.
To cancel the emergency stop, turn the Emergency
stop/Remote controller power OFF switch (10) to the right.
The switch returns to the original position.
4.1 STARTING / STOPPING ENGINE
CAUTION
To start the engine, press and hold the engine
start/stop switch (4) until it starts.
[ STARTING THE ENGINE ]
Pressing the engine start/stop switch (4) when the engine is
stopped will allow the engine to start.
[ STOPPING THE ENGINE ]
Pressing the engine start/stop switch (4) when the engine is
running will allow the engine to stop.