5. OUTRIGGER OPERATION
(1) Outrigger rotary
(5) Inner box
(9) Snap pin
OUTRIGGER COMPONENTS
(2) Outrigger cylinder
(6) Outrigger adapter (Foot)
(10) Outrigger top position pin
(3) Outrigger base
(7) Inner box position pin
(11) Stay (Damper type)
(4) Outrigger top
(8) Snap pin
(12) Rotary position pin
There are four outriggers installed on the machine. Installation of outriggers
is achieved in the same way except for the setting positions of outrigger
rotaries (1).
The setting positions of outrigger rotaries (1) are different between
outriggers [(1)] and [(4)]) and outriggers [(2)] and [(3)].
[1] OUTRIGGER SET UP OPERATION
It is forbidden to work with the crane without the outriggers.
(1) TASKS TO BE PERFORMED UPON ENGINE STOP
1. Rotate the outriggers as much as possible (check this with the alignment
of the “STANDARD” decals). Secure with the position pin.
2. Open (lift up) the outriggers as much as possible and secure with the
position pin and snap pin.
3. Pull out the inner box from the outrigger top as much as possible and
secure with the position pin and snap pin.
Applicable to “outrigger (2) and (3)”
Applicable to “outrigger (1) and (4)”
5