STEP 5 - Windshield Installation
Once bracket adjustment is complete, the windshield attaches to the front of the
brackets with T-screws and rubber washers as shown at right. Make sure the
adjustable front brackets are both set at the same height and angle. You can
loosen the adjustment knobs a turn or two if needed to set them up evenly.
Insert all four T-screws and washers into the four windshield holes as shown at
right before attempting to attach the windshield onto the RoboBrackets. We
recommend that you first install the upper and lower screws on one side, then
install the upper and lower screws on the other side. The rubber well nuts are
flexible and shield holes are oversized so you can nudge the shield around to
align the T-screws with the holes properly.