4
1
2
3
Display, Nº30
1
Input alias
This part of the Nº30's Display shows the type of input selected,
according to the settings of the internal DIP switches (see
"Assigning input aliases" in the "Installation" section of this manual).
The input aliases available are:
CD
(Compact Disc),
LD
(Laser Disc),
DBS
(Digital Broadcast),
DAT
(Digital Audio Tape),
VCR
(Video
Cassette), and
AUX
(other digital sources).
2
Input number
This part of the Nº30's Display shows the input number of the
selected digital source, according to the connections on the rear
panel (see "Rear panel, Nº30").
3
Sampling frequency
This part of the Nº30's Display shows the sampling frequency of the
digital input being processed, expressed in kilohertz (kHz). One of
three sampling frequencies will be shown:
32kHz
,
44.1kHz
, or
48kHz
.
After you press one of the source selection buttons, the Nº30 will
reduce the volume and this part of the Display will show:
While the Nº30 is attempting to lock onto a digital signal, this part
of the Display will show:
If no digital signal is present (if the source is turned off, is improperly
connected, or is disconnected), this part of the Display will show: