8
4
left analog dc
out
right analog dc
out
50 – 60HZ
90 – 110VAC
~
~
~
105 – 125VAC
180 – 220VAC
210 – 240VAC
230 – 250VAC
~
~
~
operating voltage:
WARNING:
BEFORE ATTEMPTING TO OPERATE
THIS DEVICE, REFER TO OWNER'S MANUAL FOR
PROPER OPERATING INSTRUCTIONS AND SAFETY
PRECAUTIONS. HAZARDOUS VOLTAGE AVAILABLE
INSIDE; DISCONECT AC ~ MAINS CABLE BEFORE
REMOVING COVER.
digital dc
out
1
3
1
2
Rear panel, PLS-330
Disconnect all associated equipment from the AC mains BEFORE
making any signal connections and applying power to the Nº30/PLS-
330.
1
right analog dc out, left analog dc out
These outputs, one for each channel, provide DC power to the
Nº30 (via the supplied cables equipped with five-pin connectors).
Connect the left channel's
analog dc in
on the rear panel of the
Nº30 to the
left audio dc out
on the rear panel of the PLS-330;
likewise, connect the right channel's
analog dc in
on the rear
panel of the Nº30 to the
right audio dc out
on the rear panel of the
PLS-330.
2
digital dc out
This output provides DC power to the Nº30 (via the supplied cable
equipped with two-pin connectors).
Connect
digital dc in
on the rear panel of the Nº30 to the
digital
dc out
on the rear panel of the PLS-330.
3
Operating voltage label
As indicated on this label, the PLS-330 is set internally for 100V,
120V, 200V, 220V, or 240V AC mains operation @ 50 or 60Hz.
Make sure that this label indicates the correct AC operating
voltage for your location. If the voltage indicated is incorrect, or if
you wish to change the operating voltage, see your Mark Levinson
dealer.
PRECAUTION