manualshive.com logo in svg

Madrigal Audio Mark Levinson 39, Operating Manual, Page: 32 / 56

Share
Download
Madrigal Audio Mark Levinson 39 Operating Manual Download Page 32

32

Basic Operation

Before operating your Nº39, take a minute to become familiar with its controls
and their locations. (See 

“Front Panel”

 and 

“Remote Control.”

)

Loading a CD

To load a CD:

1. Make sure that the 

main power

 switch is set to the “

|

” position.

2. Press 

stop/drawer

 

to open the drawer.

3. Place a CD into the recess of the drawer, label side up. Handle the

CD by the outer edges and center hole only.

4. Press 

stop/drawer

.

Note: If you have previously saved a program for the CD, the letter 

P

 will appear

preceding the track number on the display. (See “

Programming the Nº39

.”)

To override a previously saved program, briefly press 

mode –

 once while in

program 

mode. All of the CD’s tracks will be accessible for basic operation, but the

program will still be retained in the Nº39’s memory.

Playing a CD

To play all tracks on the CD, press the 

play 

button. All tracks will play in order.

Play will stop automatically at the end of the CD.

To begin play with a track other than the first track:

1. Before pressing 

play

, press 

next 

until the number of the desired

track shows on the Display. If you pass the track you want to play,
you can “back up” by pressing 

previous

. (You may also select the

track using the numbered buttons on the Remote Control.)

2. Press 

play 

to begin playing that track. The remaining tracks will

play in order. Play will stop automatically at the end of the CD.

To return to the beginning of a track while it is playing, press 

play

. Play will be

suspended briefly, then that track will replay followed by the remaining tracks on
the CD.

Random Play

Using the Remote Control, you may have the Nº39 play tracks at random. To do
this, press the 

0

 

(zero) numbered key, then press 

play

. The display will show

RANDOM 

briefly to indicate that you have entered the random-play mode. Subse-

quently, the letter 

R

 

will appear preceding the track number in the display as a

reminder. To cancel random play, press 

stop

.

Navigating the Disc

You may skip to another track any time while a CD is playing. To move to an-
other track, press 

next 

(to go forward) or 

previous 

(to go backward) until the

number of the track you want to play shows on the Display. (You may also select
the track using the numbered buttons on the Remote Control.) Play will resume
as soon as the pickup reaches that track.

You may search for a particular passage on the CD using 

fast forward 

and

rewind, 

by 

pressing and holding 

the 

next 

and 

previous 

buttons (respectively). Use

Summary of Contents for Mark Levinson 39

























































Reviews:

No comments