AP-WRC2
Installation & User Manual
Rev 0.2
1.2
Specifications
The system consists of a box which houses the wireless receiver,
microcontroller and electronics for communicating with the autopilot, 5m
of cable and two (2) remote control fobs (transmitters) each with four (4)
buttons labelled A,B,C & D. An optional external antenna is available to
extend the operating range.
Electrical Supply Voltage
10 to 15Vdc
Standby Current
(without buttons pressed
)
< 45mA
Operating Current
(with buttons pressed)
< 80mA
Internal Fuse Type
M205 Glass Fuse (20mm)
Internal Fuse Rating
200mA (normal blow)
Transmitter Range
50m (line of sight)
Transmitter Frequency
433Mhz
Transmitter Battery
2 x CR2016 lithium per
fob (user replaceable)
IP Rating
Receiver:
44
Fob:
67
External Antenna (optional)
Recommended for boats
longer than 8m or where the
mounting location prevents
adequate signal reception.
Note: The supplied cable is already terminated at the AP-WRC2 enclosure. The free
end has bare wires prepared for termination in screw terminals.
3
