Chapter 2
Installation
Course Computer (e.g. S-1, SPX5 - SPX30)
Run the cable from the AP-WRC2 mounting location to the course
computer. The cable will typically enter at the bottom of the course
computer enclosure.
Terminate the bare wires into the screw terminals of a spare SeaTalk port
of the course computer. Match the wire colour to the corresponding
terminal colour with black going to the grey (screen) terminal.
3.2.4 Installation Finish Off
Secure the cable along its length using clips or cable ties or by
installing it inside conduit or trunking to complete the installation.
Excess cable can be gathered into a loop at a convenient location and
neatly cable tied out of the way.
10
Drawing 4: Course Computer
(e.g. S-1, SPX5 - SPX30)
SeaTalk Port Terminals
Black
Red
Yellow
