GB-06
1.
Plug the micro USB plug of the charging cable
magnet charge connector
2.
Align the five contact pins of the magnet charge
connector with the contact rail on the underside of
the CT-04+ Candy Tech Smart Go Time as shown
in the picture. The five male contact pins inside the
USB-peg must fit snugly into the female contact
rail of the CT-04+ Candy Tech Smart Go Time.
Your CT-04+ Candy Tech Smart Go Time will not
charge with an improper electrical connection.
Charging the CT-04+ Candy Tech
Smart Go Time
Charge the CT-04+ Candy Tech Smart Go Time for ca. 2 hours before first
use.
Re-charge the battery before the battery charge drops below 20 %. The
“Battery Low icon” will appear on the screen. A complete charge of the
battery of the device takes about 1.5 hours.
Charge time may depend on the power source used. A standard USB
charger will normally charge with a higher current than a computer USB
port.
