Product User Guide
4
1.
Connect an RFC1000-IP69K wireless transceiver to the Windows PC with the provided USB cable.
2.
Additional RFC1000’s can be used as repeaters to transmit over greater distances. Plug each one
into an electrical outlet in the desired locations.
3.
Verify that the data loggers (sold separately) are in wireless transmission mode.
4.
On the Windows PC, launch the MadgeTech 4 Software.
5.
All active data loggers will be listed in the Device tab within the Connected Devices panel.
6.
To claim a data logger, select the desired data logger in the list and click the
Claim
icon.
7.
Once the data logger has been claimed, select a start method in the Device tab.
Activating & Deploying the Data Logger
Software Installation
MadgeTech 4 Software
The MadgeTech 4 Software makes the process of downloading and reviewing
data quick and easy, and is free to download from the MadgeTech website.
Installing the MadgeTech 4 Software
1.
Download the MadgeTech 4 Software on a Windows PC by going to:
www.madgetech.com/software-download
.
2.
Locate and unzip the downloaded file (typically you can do this by right clicking on the file
and selecting
Extract
).
3.
Open the
MTInstaller.exe
file.
4.
You will be prompted to select a language, then follow the instructions provided in the
MadgeTech 4 Setup Wizard to finish the MadgeTech 4 Software installation.
Installing the USB Interface Driver
USB Interface Drivers can easily be installed on a Windows PC, if they are not already available
and running.
1.
Download the USB Interface Driver on a Windows PC by going to:
www.madgetech.com/software-download.
2.
Locate and unzip the downloaded file (typically you can do this by right clicking on the file
and selecting
Extract
).
3.
Open the
PreInstaller.exe
file.
4.
Select
Install
on the dialog box.
For steps to claim the data logger and view data using MadgeTech Cloud
Services, refer to the MadgeTech Cloud Services Software Manual at:
www.madgetech.com/mt-cloud-manual.pdf
Summary of Contents for RFC1000-IP69K
Page 11: ......
