QuadVoltV2 and OctVoltV2
3
Additional Features and Operation (cont’d)
Set Password
To password protect the device so that others cannot start, stop or reset the
device;
1. In the
Connected Devices
panel, click the device desired.
2. On the
Device Tab
, in the Information Group, click
Properties
. Or, right-click
the device and select
Properties
in the context menu.
3. On the
General Tab
, click
Set Password
.
4. Enter and confirm the password in the box that appears, then select
OK
.
Channel Naming
Up to a 10-character channel name can be programmed into the data logger for
each channel. This ability helps to rename a channel in a report to distinguish it
from other similarly named channels.
1. In the
Connected Devices
panel, click the device desired.
2. On the
Device Tab
, in the Information Group, click
Properties
. Or, right-click
the device and select
Properties
in the context menu.
3. In the
Channels
panel, find the channel desired, then select “Use custom
name.”
4. This will prompt a space to type in a name.
5. Select
OK
, then there will be a prompt to reset the device, select
yes
.
Product Maintenance
Battery Replacement
Materials:
3/32” HEX Driver (Allen Key) and Replacement Battery (U9VL-J)
- Remove the cover from the device by unscrewing the two screws.
- Remove the battery from its compartment and unsnap it from the connector.
- Snap the new battery into the terminals and verify it is secure.
- Replace the cover taking care not to pinch the wires. Screw the enclosure back
together securely.
Note: Be sure not to over tighten the screws or strip the threads.
Recalibration
Recalibration is recommended annually.
Additional Services:
Custom calibration and verification point options available, please call for
pricing.
Call for custom calibration options to accommodate specific application needs.
Prices and specifications subject to change. See MadgeTech’s terms and conditions at
madgetech.com
To send devices to MadgeTech for calibration, service or repair, please use the MadgeTech RMA Process by visiting
madgetech.com
, then under the services tab, select RMA Process.
