MadgeTech QuadVoltV2, Product User Manual

Page: 3 / 7

QuadVoltV2 and OctVoltV2
Product Operation
1.
Insert the Software USB Stick in an open USB port. If the autorun does not
appear, locate the drive on the computer and double click on Autorun.exe .
Follow the instructions provided in the Wizard. Install the MadgeTech 4
Software and USB Drivers onto a Windows PC.
2.
Launch the MadgeTech 4 Software.
3.
The IFC200 interface comes with a USB cable. Plug one end of the cable into
an available USB port on the PC and plug the opposite end of the cable into
the communication port on the IFC200. The drivers will install automatically.
4.
The device will appear in the Connected Devices list, highlight the desired
data logger. For most applications, select “ Custom Start ” from the menu bar
and choose the desired start method, reading rate and other parameters
appropriate for the data logging application and click “ Start ”. ( “ Quick Start ”
applies the most recent custom start options, “ Batch Start ” is used for manag-
ing multiple loggers at once, “ Real Time Start ” stores the dataset as it records
while connected to the logger. ) The status of the device will change to “ Run-
ning ”, “ Waiting to Start ” or “ Waiting to Manual Start ”, depending upon
your start method.
5.
Disconnect the data logger from the interface cable and place it in the
environment to measure. Note: The device will stop recording data when the
end of memory is reached or the device is stopped. At this point the device
cannot be restarted until it has been
re-armed by the computer.
6.
To download data, connect the logger to the interface cable. Highlight the
data logger in the Connected Devices list. Click “ Stop ” on the menu bar.
Once the data logger is stopped, with the logger highlighted, click “ Down-
load ”. You will be prompted to name your report. Downloading will offload
and save all the recorded data to the PC.
Quick Start Steps
1