Page 11
MadgeTech PR2000
Section 5: PR2000 Function Reference
5.1 Main Screen
The main screen of the PR2000 features a real-time display of most recently
measured pressure data and a real-time graph of the 100 most recently
recorded data points. At the bottom of the main screen are tabs corresponding
to each of the four function keys. These tabs are used to access the four
main function menus of the PR2000: status, statistics, units, and setup. The
left side of the main screen and all subsequent screens of the device is where
important status information icons can be found (detailed in Section 3:
Important Status Icons – page 5) including recording status, memory status,
busy status, external power status, and battery power status.
5.2 Status Menu
Pressing F1 on the main screen brings up the Status menu. The first screen
that appears in the Status Menu is Run Parameters, but the Memory Status
and Time screens can also be viewed by pressing the F2 and F3 keys respec-
tively.
5.2.i Run Parameters
The Run Parameters screen displays important information regarding the
device’s current recording session. These parameters include the time and
date the recording session started (start time and start date), the time and
date the recording session will end (stop date and stop time) due to either
a full memory or preprogramming in the MadgeTech software. The rate at
which the PR2000 is recording (rate) is also displayed. The device’s current
status (either running or stopped) is the last parameter on the Run Parameters
screen.
5.2.ii Memory Status
The Memory Status screen is where all information regarding the PR2000’s
memory. This screen displays the percent of memory space currently available
(memory left), the number of readings currently stored on the device (readings),
the maximum number of readings the device can record (max readings), as
well as information about the wrap feature displaying either “disabled” or
the number of wrap readings currently stored in memory.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
