UNPACKING & SET UP INSTRUCTIONS
Use of safety gloves is imperative while performing
adjustment or repair of the machine
A- Removal from the carton
•
WARNING
–
Unpacking and completing the assembly should be done a flat, stable surface with enough
space for machine handling and its packaging. Packaging must be disposed of in accordance with the
local regulations.
•
Remove the staples, break the glue on the top box flaps or cut the tape at the carton end and peel
along the top flat to open the carton.
•
Remove any loose parts included with the lawnmower e.g., grass box and including the
instruction manuals and tools where applicable and store safely for future reference.
•
Cut along the corners of the carton and lay flat.
•
Remove any packing material and roll or slide the lawnmower out of the carton checking the
empty carton for loose parts.
1
2
3
4
5
1 : Spark plug wrench
2 : Cable clips
3 : Grass catch bag and its metal frame
4 : Mulching plug
5 : Side discharge deflector
B- Disconnect the spark plug
•
Before assembling your lawnmower, disconnect the spark plug wire from the spark plug and ground it to
the engine by attaching the rubber boot or metal clip to the grounding post on the engine.
C- Items required for assembly
•
Pliers (may be useful)
•
0.6 Litre SAE 30 Oil
•
Fresh Petrol
