6
come to a complete stop and, where a key is fitted remove the key:
- Whenever you leave the lawn mower;
- Before refuelling;
Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn
the fuel off at the conclusion of mowing;
Go slow when using a trailing seat;
MAINTENANCE AND STORAGE
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;
Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame
or spark;
Allow the engine to cool before storing in any enclosure;
To reduce the fire hazard, keep the engine, silencer, exhaust, battery compartment and petrol storage area
free of grass, leaves, or excessive grease;
Check the grass catcher frequently for wear or deterioration;
Replace worn or damaged parts for safety; Only use original spare parts
Blade sharpening and balancing including relative dismantling and re-assembly are complicated operations
which involves specific competence as well as special equipment. For safety reasons, these operations
must be carried out by a specialized technical assistance centre. The same procedure applies for blade
replacement.
The cutting edges of the mower blade are sharp and can lacerate (cut) skin tissue. Care should be taken
when doing any repair work on or around the mower blade.
If the fuel tank must be drained, this should be done outdoors.
PRODUCT SPECIFICATIONS
Factory model
TZ46SB-139
TZ51SF-BS625EXi
Drive
Self-propelled
Self-propelled
Engine
TZ1P65F
BS625Exi
Nominal Power
2.0kW
2.2kW
Max operation Engine
Speed
2800min-1
2800min-1
Displacement
139 cm
3
150 cm
3
Height Adjustments
Central adjustments
Central adjustment
Cutting Heights
25-70mm (7 stages)
25-70mm (7 stages)
Grass collector
Rear bag
3in1
Grass collector volume
50 litres
50 litres
Cutting width
46 cm
51 cm
