EN
70
EN
71
Using the appliance
Warning!
Never cover the appliance during operation. This could
lead to heat accumulation or fire and damage to your appliance.
Make sure no water can drop into the appliance.
Switch On/Off
Press ON/OFF button
A.
The display
G
shows the current humidity level
in the room.
The pump indicator is lit.
Timer settings
Set delay stop function
While the appliance is operating,
press button
B
to enter the timer set-
ting mode. With every pressing the
set time will increase 1 hour from 1
to 24 hours and back to to 1 to start
again. After choosing the time, the
timer will set automatically after 5
seconds. When the time is elapsed,
the appliance will turn off automati-
cally.
Timer indicator is lit.
Set delay start function
While the appliance is in standby
mode, press button
B
to enter the
timer setting mode. With every
pressing the set time will increase
1 hour from 1 to 24 hours and back
to to 1 to start again. After choosing
the time, the timer will set automati-
cally after 5 seconds. When the time
is elapsed, the appliance will turn on
automatically.
Timer indicator is lit.
Mode
Press button
E
to switch between
automatic and continuous dehumidi-
fication.
Auto
: The initial value of the set hu-
midity is 50 %. If the ambient humid-
ity surpasses the set humidity level
by 5 %, compressor and fan will start
working. If the ambient humidity is
5 % below the set humidity level,
the compressor stops, but the fan
continues working. Between these
two values the appliance dehumidi-
fies normally.
Continuous
: The appliance oper-
ates independently of the ambient
humidity. The fan is automatically on
high speed and can be adjusted.
Fan speed
Press Fan speed button
C
to switch
between high and low fan speed.
Setting humidity level
Press button
D
to choose a humidity
level in AUTO mode between 30 %
and 80%, in steps of 5 %.
Inside drying
Press and hold fan button
C
for 3
seconds to activate the inside drying
function. This will prevent mould
from growing inside the appliance.
Press again for 3 seconds to stop.
