EN
154
EN
155
Empty the water tank
Carefully pull out the water
tank
6
to avoid spilling water.
Caution!
If water appears to be in-
side the appliance, empty the wa-
ter tank and let the appliance dry.
Empty and reinstall the water
tank
6
. Make sure it is installed
properly.
1
2
Close the air outlet grille
Close the air outlet grille
2
by
pushing down the flap.
Open the air outlet grille
When putting the appliance
into operation, open the flap
of the air outlet grille
2
by
pushing it open at the mark la-
belled with PUSH.
1
2
Switch off
Press the on/ off button
E
to
switch off the appliance.
Note:
Wait 3 minutes until
switching on the appliance
again.
Switch on
Insert the power supply cord
7
into a suitable wall socket.
Press the on/ off button
E
.
Caution!
Do not plug the appliance
into a multiple socket with other
devices.
1
1
2
2
Remove intake grille
For cleaning the intake grille
9
(see “Care and Maintenance”),
push the two flaps holding it
and remove it.
1
Install intake grille
Push the intake grille
9
gently
onto the housing until it clicks
into place.
2
Use the condensation drain
Condensation water can per-
manently be derived with a
drainage hose.
Make sure that the hose is at-
tached firmly and ensure an
unhindered water drain.
1
2
2
1
1.
2.
1.
2
1
2
2
1
1
1.
2.
