MADECO MD-M9, Operation Manual

Page: 6 / 11

Code Attributes Explanation
1 Top Red LED
Cumulative and Instantaneous value
Display Window
2
Bottom green LED
Alarm Output set Display window
3 OUT
（
red
）
Alarm light.Light when alarm is active
(The timing mode is R , Shiny delay period,
the lower the delay time countdown )
10 SET
（
green
）
1. In normal indication, pressing the
button 30 seconds to enter the parameter
setting group .
2. In parameter edit mode, press to modify
the value of the store and go to the next
parameter
11
Left
Alarm Set
1. In normal display, press this key to
enter the SV set value modification
2. In the parameter setting, press to
enter the parameter modification mode
3. In parameter edit mode, press the
flashing cursor can be rotated to the left
to move
12 Down Set
Parameter edit mode, press to move the
cursor down to decrement the value at the
blinking
13 Up Set Parameter edit mode, press to move the
F. Instructions