MadBoy TONER 3, Owner'S Manual, Page: 9 / 72

Getting Connected
WWW.MADBOY-AUDIO.COM
9
Basic Operation Instructions
1. Connect Toner 3 to the power adapter or to the computer* using USB A - USB B cable.
2. Connect audio input sources to the Toner 3.
3. Connect audio output from Toner 3 to input of the mixer or mixing amplifier.
4. Turn the main power switch to ”I” position on the back panel.
5. Turn on the Toner 3 by pressing the power switch on the front panel or remote control.
6. Turn on your audio system.
7. Select right input source from the front panel or remote control.
8. Adjust key control from the front panel or remote control.
*USB interface is supplying the power and audio.
Typical Connection Diagrams
AUDIO
SOURCE
MIXER
ACTIVE SPEAKERS /
AMPLIFIER
TONER 3 MICROPHONES
AUDIO
SOURCE
MIXING AMPLIFIER
PASSIVE SPEAKERS
TONER 3 MICROPHONES
Note! Microphones must be connected to the mixer or mixing amplifier
connected after the Toner 3 Key Control device.